BioGrip – B

FAB system is a hybrid reactor where attached growth and suspended growth activity takes place simultaneously and has good effect on de-nitrification and de-phosphorization; it is widely used in the industrial waste water treatment and municipal waste water treatment.

At MM Aqua Technologies, we design and manufacture and supply Moving Bed Bio Reactor (MBBR)/ Fluidized
Aerated Bed Reactor (FAB) media for Municipal & industrial wastewater treatment.

Essentially FAB system is a hybrid reactor where attached growth and suspended growth activity takes place simultaneously and has good effect on de-nitrification and de-phosphorization; it is widely used in the industrial waste water treatment and municipal waste water treatment

Process Principal:
The waste water goes through the suspending media of MBBR reactor, form the biological membrane on the surface of the media gradually, with the action of the microbial on the biological membrane, the waste water is purified. The media can move freely in the reactor with the mixing of the water; for the aerobic reactor, the aeration will make the media move; for the anaerobic reactor, mechanic mixing will make the media move. Our MBBR media is new-developed media for the MBBR process, has better treatment effect compared to traditional media.

Excess biomass sloughs off from the media and is washed out of the process with the treated effluent.
Several process combinations have been realized in upgrading activated sludge treatment plants. The existing tanks can be either retrofitted to MBBR tanks or they are preceded by a so-called roughing MBBR reactor. However, it is also possible to realize hybrid solutions using the bio film carriers in the existing tanks without any retrofitting.
When a pure MBBR process is employed, a typical overall treatment design consists of pre-treatment (screening) followed by one or more MBBR tanks, where the degradation processes of soluble matter take place. The final stage of the treatment is normally the particle separation.

We have our structure framed keeping the Customer’s Interest in mind. We work on 3 L concept for economic solution and 3R concept for efficient solution.